2001-02-20 Jonathan Larmour * common/eCosTestClient.cpp (LocateExecutables): Add /sbin and /usr/sbin to path before trying to run fuser. 2000-09-28 Jesper Skov * common/eCosTestSerialFilter.cpp (CMD_TestBinary): Reset counter for each test so the failure data is the same from two different runs of the test. 2000-09-15 Jesper Skov * common/ser_filter.cpp (main): Don't require ResourceServer. * common/Makefile.am: Added ser_filter handling. * common/Makefile.in: Ditto. * common/configure: Ditto. * common/configure.in: Ditto. * common/eCosTest.cpp: Fix typo. 2000-08-16 Jonathan Larmour * common/ser_filter.cpp (main): Clean up warning 2000-08-08 Jonathan Larmour * common/eCosTestSerialFilter.h: Update flow_cfg_t values for correct target settings 2000-08-01 Jonathan Larmour * common/eCosTestSerialFilter.cpp (PrintHex): Print out more printable chars (SetConfig): Support flow control (ParseConfig): Support target setting of flow control (CMD_TestBinary): Don't output XON/XOFF. Output 255 chars not 256 to make buffer problems more obvious. * common/eCosTestDownloadFilter.h: Allow SET_VALUE to set optional args * common/eCosTestSerialFilter.h: Allow SET_VALUE to set optional args Also add flow_cfg_t type and flags member in ser_cfg_t for flow control 2000-07-24 Jonathan Larmour * common/eCosTestSerialFilter.cpp (FilterFunctionProper): Store output for tracing up so it is output a packet at a time. As well as clarifying the output, it is required when sending to GDB to prevent the trace 'O' packets in the middle of target packets. (CMD_TestBinary): Delay to allow target to read in checksum. This prevents overruns before finishing reading the checksum masking the real cause of the problem. (CeCosTestSerialFilter): Initialise stored trace buffer members * common/eCosTestSerialFilter.h: Add trace buffer members for above to CeCosTestSerialFilter 2000-06-19 John Dallaway * unix/Makefile: Link with -lposix4 under Solaris for sched_yield(). 2000-06-16 Jonathan Larmour * common/eCosTestDownloadFilter.cpp: Remove RCS id tags * common/eCosTestMonitorFilter.cpp: Ditto * common/eCosTestSerialFilter.cpp: Ditto 2000-06-15 John Dallaway * common/eCosTest.cpp: Modify CeCosTest construvtor to use GetEnvironmentVariable() rather than _tgetenv() under Win32. For some unknown reason, _tgetenv() is not returning the correct version of PATH. * common/eCosTestPlatform.cpp: Modify SaveToRegistry() to save all test platform attributes. 2000-05-03 Bart Veer * common/permtest.cxx (find_ptest): Do a little bit of searching for the permutation file. Catch errors and give a diagnostic, rather than aborting because of an uncaught C++ exception. 2000-04-14 Simon FitzMaurice * common\ResetAttributes.cpp : do not carry forward values for skipped fields in reset strings * common\eCosTest.cpp : Avoid overflow in socket timeouts 2000-04-13 Jesper Skov * unix/Makefile: add randfile 2000-04-13 Jesper Skov * common/eCosTestDownloadFilter.cpp: Cast Write arguments to void*. 2000-04-13 Simon FitzMaurice * common\ResetAttributes.cpp common\eCosTest.cpp common\eCosTestClient.cpp Ensure socket timeout matches on_off/off_on delay for reset Correct parsing of eCosTestClient delay args. Use remote resource to determine baud rate for default download timeout. 2000-04-13 Simon FitzMaurice * common\ResetAttributes.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestServer.cpp common\eCosTestUtils.cpp common\rgdb.cpp common\summlog.cpp common\x10reset.cpp win32\eCosTest.dsp Tidy up reset output. Police use of -f and -r switches more accurately. Set default timeout in all cases. 2000-04-11 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\ResourceServer.cpp common\TestResource.cpp common\TestResource.h common\X10.h common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestDownloadFilter.cpp common\eCosTestDownloadFilter.h common\eCosTestMonitorFilter.cpp common\eCosTestMonitorFilter.h common\eCosTestSerialFilter.cpp common\eCosTestSerialFilter.h common\eCosTestServer.cpp common\eCosTestUtils.cpp common\eCosTestUtils.h common\resetall.cpp common\rgdb.cpp common\ser_filter.cpp common\stat.cpp common\summlog.cpp common\x10reset.cpp unix\Makefile win32\eCosTest.dsp win32\Amplicon\AmpliconD.cpp General tidy-up. 2000-04-10 Bart Veer * common/permtest.cxx (main): Add diagnostics callbacks to database initialization. 2000-03-20 John Dallaway * win32/eCosTest.dsp: Add common/eCosTestMonitorFilter.h and common/eCosTestMonitorFilter.cpp to the project. 2000-03-16 Jesper Skov * common/eCosTestMonitorFilter.h: * common/eCosTestMonitorFilter.cpp: * common/ser_filter.cpp: * unix/Makefile (common_sources): Added monitor filter and new -m option to ser_filter. This allows simple monitoring of the traffic between host and target. 2000-03-15 John Dallaway * common/eCosTest.cpp: Modify RunGdb() to sleep 500ms if there is no message. 2000-03-13 Simon FitzMaurice * common\ResourceServer.cpp common\TestResource.cpp common\eCosTest.cpp common\eCosTestClient.cpp common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestUtils.cpp common\randfile.cpp common\rgdb.cpp common\ser_filter.cpp Mark UNIX sections of code as such. Correct behavior of eCosTestClient when give directory as argument. A couple of allocations -> stack for simplicity. 2000-03-10 Simon FitzMaurice * common\ResetAttributes.cpp common\ResourceServer.cpp common\X10.cpp common\TestResource.cpp common\TestResource.h common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestDownloadFilter.cpp common\eCosTestSerial.cpp common\eCosTestServer.cpp common\eCosTestSocket.cpp common\rgdb.cpp common\ser_filter.cpp common\x10reset.cpp unix\Makefile win32\eCosTest.dsp win32\Amplicon\AmpliconD.cpp Move CeCosTrace class to its own file Increase Time type to 64 bits to avoid signedness problems Remove priority latch functionality * common\eCosTestUtils.cpp common\eCosTestUtils.h Make CommandLine() UNICODE-compliant * common\summlog.cpp Remove hack designed to cater for incorrectly terminated output lines * win32\SingleCPU.cpp Provide ability to run on named processor * common\eCosTestClient.cpp Improve recognition of non-executable files on UNIX 2000-03-09 Simon FitzMaurice * win32\SingleCPU.cpp Avoid a performance problem with bash which, when left to its own devices, is slow on multi-processor machines. 2000-03-09 John Dallaway * common/eCosTest.cpp, common/eCosTest.h: Use 'REMOTE_SIM' as the platform type identifier for remote simulators. 2000-03-09 Bart Veer * common/permtest.cxx (main): Add an explicit call to resolve_all_conflicts(), although I am not yet sure under what circumstances this would be necessary. 2000-03-08 Simon FitzMaurice * common\eCosTestClient.cpp Correct logic error - - allow multiple threads only when non-local 2000-03-08 Bart Veer * common/configure.in (cyg_ac_infra_libdir): Fix typo detected by Solaris build 2000-03-08 Simon FitzMaurice * common\summlog.cpp Eliminate compiler warnings on UNIX. 2000-03-08 Simon FitzMaurice * common\eCosTestClient.cpp Prevent locally running clients loading from resource server. 2000-03-08 Simon FitzMaurice * common\eCosTest.cpp common\summlog.cpp Ensure that gdb output is terminated by a newline and that summlog initializes target list correctly. 2000-03-08 Simon FitzMaurice * common\ResetAttributes.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTestClient.cpp win32\Amplicon\AmpliconD.cpp Add name argument to RunThread calls for debugging. Do not allow wait for SuckTheadfunc in reset to time out - thread already has a timeout * win32\eCosTest.dsw : Adapt to new location of cdl.dsp * common\summlog.cpp : ensure eCosTest::Init() and Term() are called 2000-03-08 Simon FitzMaurice * common\ResetAttributes.cpp common\ResourceServer.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestServer.cpp common\eCosTestUtils.cpp common\eCosTestUtils.h common\resetall.cpp common\rgdb.cpp common\ser_filter.cpp common\stat.cpp common\summlog.cpp common\x10reset.cpp win32\Amplicon\AmpliconD.cpp Eliminate GarbageCollector class in favor of CeCosTest::Init() and CeCosTest::Term() Fix UNICODE problems in eCosTestUtils 2000-03-08 Bart Veer * common/permtest.cxx (process_startup): Look for CYGHWR_HAL_STARTUP as well as CYG_HAL_STARTUP 2000-03-08 John Dallaway * win32/eCosTest.dsw: Use relocated cdl project file. 2000-03-07 Bart Veer * common/permtest.cxx (process_startup): If a target does not have a CYG_HAL_STARTUP option, ignore any attempts to set the startup. 2000-03-07 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\ResourceServer.cpp common\TestResource.cpp common\TestResource.h common\X10.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestDownloadFilter.cpp common\eCosTestDownloadFilter.h common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSerialFilter.cpp common\eCosTestSerialFilter.h common\eCosTestServer.cpp common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestUtils.cpp common\eCosTestUtils.h common\resetall.cpp common\rgdb.cpp common\ser_filter.cpp common\stat.cpp common\summlog.cpp common\x10reset.cpp win32\eCosTest.dsw win32\Amplicon\AmpliconD.cpp Use std::vector directly instead of StringArray, PtrArray Introduce common command-line processing to CeCosTestUtils Tidy output and trace functions and move to CeCosTrace 2000-03-03 Simon FitzMaurice * common\TestResource.h common\eCosTest.cpp common\eCosTest.h Adjust for UNIX compiler requirements. 2000-03-03 Simon FitzMaurice * common\ResetAttributes.cpp common\TestResource.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestUtils.cpp common\eCosTestUtils.h unix\Makefile win32\eCosTest.dsp win32\Amplicon\AmpliconD.cpp Thread-related code extracted to new class CeCosThreadUtils 2000-03-03 Simon FitzMaurice * common\TestResource.cpp common\TestResource.h common\eCosTest.cpp Eliminate memory leaks. Allow resources to be properly reused for benefit of Resource Tool. 2000-03-02 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\ResourceServer.cpp common\TestResource.cpp common\TestResource.h common\X10.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestDownloadFilter.cpp common\eCosTestDownloadFilter.h common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSerialFilter.cpp common\eCosTestSerialFilter.h common\eCosTestServer.cpp common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestUtils.cpp common\eCosTestUtils.h common\resetall.cpp common\rgdb.cpp common\ser_filter.cpp common\stat.cpp common\stdafx.cpp common\stop.cpp common\summlog.cpp common\x10reset.cpp unix\Makefile win32\eCosTest.dsp win32\Amplicon\AmpliconD.cpp Introduce flexible reset scheme. Migrate more classes to Utils from eCosTest. Introduce collections.h for String, StringArray etc... Use common CSubprocess class implementation. 2000-02-29 Simon FitzMaurice * common\ResetAttributes.cpp : Ensure it compiles on unix 2000-02-29 Simon FitzMaurice * common\ResetAttributes.cpp : correct typo * win32\eCosTest.dsw : add testtool 2000-02-29 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\ResourceServer.cpp common\TestResource.cpp common\TestResource.h common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSerialFilter.cpp common\eCosTestServer.cpp common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestStd.h common\eCosTestUtils.cpp common\eCosTestUtils.h common\resetall.cpp common\rgdb.cpp common\stat.cpp common\summlog.cpp common\wcharunix.h common\x10reset.cpp win32\subprocess.cpp win32\subprocess.h win32\Amplicon\AmpliconD.cpp Change to flexible reset scheme. CeCosTestUtils::String -> String, CeCosTestUtils::StringArray -> StringArray 2000-02-25 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\ResourceServer.cpp common\TestResource.cpp common\x10reset.cpp Use ResetAttributes properties to serialize TestResource. 2000-02-25 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\TestResource.cpp common\X10.cpp common\X10d.cpp common\eCosTestClient.cpp common\eCosTestServer.cpp common\x10reset.cpp win32\Amplicon\AmpliconD.cpp Reset control string verification fully server-side 2000-02-25 Simon FitzMaurice * common\ResetAttributes.cpp common\ResetAttributes.h common\TestResource.cpp common\X10.cpp common\X10.h common\X10d.cpp common\eCosTest.cpp common\eCosTestClient.cpp common\eCosTestServer.cpp common\x10reset.cpp win32\Amplicon\AmpliconD.cpp Normalize control code usage to 0-15, 0-15 2000-02-25 Simon FitzMaurice * unix/Makefile : update for ResetAttributes 2000-02-25 Simon FitzMaurice * common\TestResource.cpp common\TestResource.h common\X10.cpp common\X10.h common\X10d.cpp common\eCosTest.cpp common\eCosTestClient.cpp common\eCosTestServer.cpp common\resetall.cpp common\x10reset.cpp win32\X10d.dsp win32\eCosTest.dsp win32\Amplicon\AmpliconD.cpp Generalize "X10 reset" to "reset" - introduce ResetAttributes class to hold the details. 2000-02-24 Simon FitzMaurice * common\TestResource.cpp common\TestResource.h common\X10.h common\X10d.cpp common\x10reset.cpp win32\eCosTest.dsw Add Amplicon to "all" project. Fail on reset if comms/tcp port cannot be opened. Add -t (timeout on read) param to x10reset 2000-02-24 Simon FitzMaurice * common\TestResource.cpp win32\eCosTest.dsw win32\Amplicon\AmpliconD.cpp win32\Amplicon\AmpliconD.dsp win32\Amplicon\Dio_tc.h win32\Amplicon\Dio_tc.lib Implement Amplicon reset daemon in C++. 2000-02-23 Simon FitzMaurice * common\TestResource.cpp common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestStd.h common\eCosTestUtils.cpp common\summlog.cpp common\wcharunix.h strnccmp -> _tcsicmp 2000-02-23 Simon FitzMaurice * win32\eCosTest.dsw Add "All" utility project. 2000-02-23 Simon FitzMaurice * common\eCosTest.cpp common\eCosTest.h Allow HwTypes to be expressed as strings. 2000-02-23 Simon FitzMaurice * common\TestResource.cpp common\X10.cpp common\X10d.cpp common\x10reset.cpp Change X10 daemon protocol to allow long delays 2000-02-22 Simon FitzMaurice * common\TestResource.cpp common\eCosTest.cpp common\eCosTestClient.cpp Adjust for Solaris. Increase total reset timeout. 2000-02-21 Simon FitzMaurice * common\TestResource.cpp common\TestResource.h common\X10.h common\eCosTest.cpp common\eCosTest.h Add "Originator", "Reason", "BoardId", "Email" and "Date" to known resource attributes. Add reset timeout attribute. 2000-02-18 Simon FitzMaurice * common\eCosTest.cpp common\eCosTest.h Changes to support non-gdb execution. 2000-02-17 Simon FitzMaurice * common\eCosTest.cpp Remove incorrect #include 2000-02-16 Simon FitzMaurice * common\TestResource.cpp common\eCosTest.cpp common\eCosTest.h Add support for defining platforms. 2000-02-14 Simon FitzMaurice * common\permtest.cxx Update copyright headers in files with non-standard extensions :-) 2000-02-14 Simon FitzMaurice * common\ResourceServer.cpp common\TestResource.cpp common\TestResource.h common\X10.cpp common\X10.h common\X10d.cpp common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestDownloadFilter.cpp common\eCosTestDownloadFilter.h common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSerialFilter.cpp common\eCosTestSerialFilter.h common\eCosTestServer.cpp common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestStd.h common\eCosTestUtils.cpp common\eCosTestUtils.h common\randfile.cpp common\resetall.cpp common\rgdb.cpp common\ser_filter.cpp common\stat.cpp common\stdafx.cpp common\stop.cpp common\summlog.cpp common\wcharunix.h common\x10reset.cpp win32\subprocess.cpp win32\subprocess.h Update copyright headers 2000-02-07 Simon FitzMaurice * win32\subprocess.cpp Fix fix to handle leak. 2000-02-07 Simon FitzMaurice * win32\eCosTest.dsw Add "All" target * win32\subprocess.cpp Fix handle leak 2000-02-04 Simon FitzMaurice * common\eCosTestDownloadFilter.cpp common\eCosTestSerialFilter.cpp common\eCosTestUtils.cpp Correct for abnormal behaviour of vsnprintf under NT. * win32\permtest.dsp Use cdl from v:\ide 2000-02-01 Simon FitzMaurice * ecostest\common\TestResource.cpp ecostest\common\eCosTest.cpp ecostest\common\eCosTest.h ecostest\common\eCosTestClient.cpp ecostest\common\eCosTestDownloadFilter.cpp ecostest\common\eCosTestSerialFilter.cpp ecostest\common\eCosTestSocket.cpp ecostest\common\eCosTestStd.h ecostest\common\eCosTestUtils.cpp ecostest\common\eCosTestUtils.h ecostest\common\rgdb.cpp ecostest\common\summlog.cpp ecostest\win32\summlog.dsp min->MIN for compilation on UNIX CeCosTest::ExecutionParameters gains type as 1st argument Performance improvements to summlog 2000-02-01 Simon FitzMaurice * common\ResourceServer.cpp common\TestResource.h common\X10.cpp common\X10.h common\X10d.cpp common\eCosTestDownloadFilter.h common\eCosTestSerial.cpp common\eCosTestSerial.h common\eCosTestSerialFilter.h common\eCosTestServer.cpp common\eCosTestSocket.h common\randfile.cpp common\resetall.cpp common\ser_filter.cpp common\stat.cpp common\stdafx.cpp common\stop.cpp common\wcharunix.h common\x10reset.cpp win32\subprocess.cpp Normalize copyright headers. 2000-01-31 Bart Veer * common\permtest.cxx (tcl_pkgconf_command): Use the default template rather than the all template when uItron is disabled. Downgrade an error to a warning to cope with the watchdog device not being in the default template. 2000-01-28 Simon FitzMaurice * common\eCosTest.cpp Check cancelled status in gdb driving loop. 2000-01-27 Simon FitzMaurice * common\summlog.cpp Ensure pass and inapplic separated in totals for the architectures by perm tables. 2000-01-21 Simon FitzMaurice * common\resourceserver.cpp Efficiency improvements (single send on query) 2000-01-20 Simon FitzMaurice * common\summlog.cpp Separate Pass and NA. Fix problem w\ successful results not being counted. 2000-01-19 Simon FitzMaurice * common\eCosTest.cpp common\eCosTestUtils.cpp common\eCosTestUtils.h common\summlog.cpp Attempt to reduce memory usage of summlog. Found possible problem - different specs of vsnsprintf on UNIX vs NT. 2000-01-14 Simon FitzMaurice * common\ResourceServer.cpp common\eCosTest.cpp common\eCosTestSocket.cpp Cygnus -> Red Hat (not copyrights) * common\summlog.cpp Attempt to fix memory behaviour on UNIX. 2000-01-14 Simon FitzMaurice * summlog.cpp Correct too-late release of string buffer. 2000-01-13 Simon FitzMaurice * eCosTest.cpp Correct overload problem w\ Run 1999-12-23 John Dallaway * unix\Makefile: Use g++ for compilation rather than egcs. 1999-12-23 John Dallaway * common\eCosTestUtils.h: Use '#pragma warning' with Microsoft compiler only. 1999-12-22 Simon FitzMaurice * unix\makefile Add stl library to link 1999-12-22 Simon FitzMaurice * common\eCosTestUtils.h common\eCosTest.cpp Make it compile on UNIX 1999-12-21 Simon FitzMaurice * win32\eCosTest.dsw Remove TestTool (as an MFC project using properties it cannot link against the non-MFC eCosTest library) * common\ResourceServer.cpp Do not read the files if unchanged since last time * common\summlog.cpp Remove remote PR lookup functionality 1999-12-17 John Dallaway * win32\permtest.dsp: Generate RTTI when building permtest. 1999-12-17 Jonathan Larmour * common\permtest.cxx (tcl_value_command): Ensure BoolData options are enabled if they are given a value 1999-12-15 John Dallaway * win32\permtest.dsp: New VC++ project. * win32\eCosTest.dsw: Add the new permtest project to the eCosTest workspace. 1999-12-14 John Dallaway * common\permtest.cxx: Further changes to accommodate the recent libCDL API changes. * common\permtest.cxx: Accommodate the recent libCDL API changes. 1999-12-08 Simon FitzMaurice * common\eCosTest.cpp common\eCosTest.h common\eCosTestUtils.cpp common\eCosTestUtils.h Tighter policing of GetBuffer(). Fix vFormat (needed terminating \0) 1999-12-07 Simon FitzMaurice * common\TestResource.cpp common\TestResource.h common\eCosTest.cpp common\eCosTest.h common\eCosTestClient.cpp common\eCosTestSerialFilter.cpp common\eCosTestServer.cpp common\eCosTestSocket.cpp common\eCosTestSocket.h common\eCosTestUtils.cpp common\eCosTestUtils.h common\rgdb.cpp common\wcharunix.h common\x10reset.cpp win32\eCosTest.dsp Base string class on STL. Use subprocess class (like than in CT) 1999-11-23 John Dallaway * unix\Makefile: Add explicit pattern matching rule for compiling .cpp files. 1999-11-11 Bart Veer * common\permtest.cxx: Be more tolerant in the data that is accepted, to allow for incompatibilities between the old and new worlds. 1999-11-09 Bart Veer * common\permtest.cxx Replacement for permtest.tcl * common\acinclude.m4 * common\configure.in * common\Makefile.am * common\configure * common\Makefile.in * common\aclocal.m4 Build support for permtest.tcl replacement 1999-10-20 John Dallaway * win32\eCosTest.dsp, win32\eCosTest.mak, win32\ResourceServer.dsp, win32\ResourceServer.mak: Fix intermediate and output directories for the release build. 1999-10-19 Jesper Skov * common\X10d.cpp: Allow using '0' as a NOP serial device for the reset controller. * common\eCosTest.cpp: Send 'quit' to GDB after 'bt'. 1999-10-18 Jesper Skov * unix\Makefile [deleted]: * unix\Makefile [added]: Better makefile. 1999-10-14 Jesper Skov * common\ser_filter.cpp: Enabled DL filter as default. * common\eCosTestDownloadFilter.h: * common\eCosTestDownloadFilter.cpp: * common\eCosTest.cpp (ConnectSocketToSerialThreadFunc): Allow two connections during a session if the first one is a file download. * common\eCosTestServer.cpp: Added missing arg. 1999-10-13 Jesper Skov * common\eCosTestDownloadFilter.h: * common\eCosTestDownloadFilter.cpp: Use Buffer instead of array for in-buffer. Made its size an argument of the info packet. Added status to protocol (OK\DL failure\transfer failure) 1999-10-11 Jesper Skov * common\eCosTest.cpp (ConnectSocketToSerialThreadFunc): Enabled download filter. * common\eCosTestDownloadFilter.cpp: Fixed a few compiler warnings. 1999-10-08 Jesper Skov * unix\makefile: Fixed. * common\eCosTest.cpp: * common\eCosTest.h: * common\eCosTestSocket.cpp: * common\eCosTestSocket.h: * common\ser_filter.cpp: Changed ConectSocketToSerial to take parameter for both serial and socket filters. * common\eCosDownloadFilter.cpp: [added] * common\eCosDownloadFilter.h: [added] * common\ser_filter.cpp: Added download filter. 1999-10-07 John Dallaway * common\eCosTest.cpp, common\eCosTest.h: New GetGreatestSubkey() function returns the name of the subkey of the specified key with the greatest value. Modify InitTargetInfoReg() to look in the HKEY_LOCAL_MACHINE hierarchy rather than the HKEY_CURRENT_USER hierarchy. Modify InitTargetInfo() to construct the platforms registry key using GetGreatestSubkey().