/**
 * @file IxEthDBFirewall.c
 *
 * @brief Implementation of the firewall API
 * 
 * @par
 * IXP400 SW Release version 2.0
 * 
 * -- Copyright Notice --
 * 
 * @par
 * Copyright 2001-2005, Intel Corporation.
 * All rights reserved.
 * 
 * @par
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Intel Corporation nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 * 
 * @par
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * @par
 * -- End of Copyright Notice --
 */


#include "IxEthDB_p.h"

/**
 * @brief updates the NPE firewall operating mode and 
 * firewall address table
 *
 * @param portID ID of the port
 * @param epDelta initial entry point for binary searches (NPE optimization)
 * @param address address of the firewall MAC address table
 *
 * This function will send a message to the NPE configuring the
 * firewall mode (white list or black list), invalid source 
 * address filtering and downloading a new MAC address database 
 * to be used for firewall matching.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed 
 * successfully or IX_ETH_DB_FAIL otherwise
 *
 * @internal
 */
IX_ETH_DB_PUBLIC
IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta)
{
    IxNpeMhMessage message;
    IX_STATUS result;
    
    UINT32 mode        = 0;    
    PortInfo *portInfo = &ixEthDBPortInfo[portID];

    mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST);

    FILL_SETFIREWALLMODE_MSG(message, 
        IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 
        epDelta, 
        mode, 
        IX_OSAL_MMU_VIRT_TO_PHYS(address));

    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
    
    return result;
}

/**
 * @brief configures the firewall white list/black list
 * access mode
 *
 * @param portID ID of the port
 * @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST
 * or IX_ETH_DB_FIREWALL_BLACK_LIST)
 *
 * Note that this function is documented in the main component
 * header file, IxEthDB.h.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed
 * successfully or an appropriate error message otherwise
 */
IX_ETH_DB_PUBLIC 
IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode)
{
    IX_ETH_DB_CHECK_PORT(portID);
    
    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
     
    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
    
    if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST
        && mode != IX_ETH_DB_FIREWALL_BLACK_LIST)
    {
        return IX_ETH_DB_INVALID_ARG;
    }    
    
    ixEthDBPortInfo[portID].firewallMode = mode;
    
    return ixEthDBFirewallTableDownload(portID);
}

/**
 * @brief enables or disables the invalid source MAC address filter
 *
 * @param portID ID of the port
 * @param enable TRUE to enable invalid source MAC address filtering
 * or FALSE to disable it
 *
 * The invalid source MAC address filter will discard, when enabled,
 * frames whose source MAC address is a multicast or the broadcast MAC
 * address.
 *
 * Note that this function is documented in the main component
 * header file, IxEthDB.h.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed 
 * successfully or an appropriate error message otherwise
 */
IX_ETH_DB_PUBLIC 
IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable)
{
    IX_ETH_DB_CHECK_PORT(portID);
    
    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
    
    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);

    ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable;
    
    return ixEthDBFirewallTableDownload(portID);
}

/**
 * @brief adds a firewall record
 *
 * @param portID ID of the port
 * @param macAddr MAC address of the new record
 *
 * This function will add a new firewall record
 * on the specified port, using the specified 
 * MAC address. If the record already exists this
 * function will silently return IX_ETH_DB_SUCCESS,
 * although no duplicate records are added.
 *
 * Note that this function is documented in the main
 * component header file, IxEthDB.h.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed
 * successfully or an appropriate error message otherwise
 */
IX_ETH_DB_PUBLIC 
IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
{
    MacDescriptor recordTemplate;

    IX_ETH_DB_CHECK_PORT(portID);

    IX_ETH_DB_CHECK_SINGLE_NPE(portID);

    IX_ETH_DB_CHECK_REFERENCE(macAddr);

    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
    
    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
    
    recordTemplate.type   = IX_ETH_DB_FIREWALL_RECORD;
    recordTemplate.portID = portID;
    
    return ixEthDBAdd(&recordTemplate, NULL);
}

/**
 * @brief removes a firewall record
 *
 * @param portID ID of the port
 * @param macAddr MAC address of the record to remove
 *
 * This function will attempt to remove a firewall
 * record from the given port, using the specified
 * MAC address.
 *
 * Note that this function is documented in the main
 * component header file, IxEthDB.h.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed
 * successfully of an appropriate error message otherwise
 */
IX_ETH_DB_PUBLIC 
IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
{
    MacDescriptor recordTemplate;
    
    IX_ETH_DB_CHECK_PORT(portID);

    IX_ETH_DB_CHECK_SINGLE_NPE(portID);

    IX_ETH_DB_CHECK_REFERENCE(macAddr);

    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
    
    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
    
    recordTemplate.type   = IX_ETH_DB_FIREWALL_RECORD;
    recordTemplate.portID = portID;
    
    return ixEthDBRemove(&recordTemplate, NULL);
}

/**
 * @brief downloads the firewall address table to an NPE
 *
 * @param portID ID of the port
 *
 * This function will download the firewall address table to
 * an NPE port.
 *
 * Note that this function is documented in the main 
 * component header file, IxEthDB.h.
 *
 * @return IX_ETH_DB_SUCCESS if the operation completed
 * successfully or IX_ETH_DB_FAIL otherwise
 */
IX_ETH_DB_PUBLIC 
IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID)
{
    IxEthDBPortMap query;
    IxEthDBStatus result;
    
    IX_ETH_DB_CHECK_PORT(portID);

    IX_ETH_DB_CHECK_SINGLE_NPE(portID);

    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
    
    SET_DEPENDENCY_MAP(query, portID);

    ixEthDBUpdateLock();
    
    ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE);
    
    result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD);

    ixEthDBUpdateUnlock();

    return result;
}